When Creosote Builds Up

It is absolutely necessary to have a stack thermometer in order to properly ignite a stove. The magnetic surface mount kind is by far the most prevalent, and it is often fastened to the chimney hood above the range. These respond more slowly and are not as exact as probe kinds, but they will provide you with all of the information you want in order to light the stove. Remember that the temperature zones on the majority of them have a margin of error that is appropriate to account for.

The accumulation of creosote is a quite stealthy process. It is possible that at first you will not realize that it has a tendency to feed on itself. As it accumulates, it reduces the amount of air that can pass through the chimney and/or the stove pipes. This further restricts the flow of smoke by slowing it down as it travels out of the chimney, giving the creosote more time to condense and deposit itself and giving the smoke more time to cool down. If you don’t put it out each morning when you get up, it will rapidly accumulate to the point where it will be risky to do so.

If this is the case, your only option is to thoroughly clean the chimney and check it to determine the degree to which the material may have glazed over. Glazing is the process in which ordinary creosote begins to bind and adhere from the tar fog, leaving behind a layer that resembles glass. If your stove was professionally built, the pipes leading to it should be relatively short and there should not be many bends. Because of the laminar air flow traveling upward and the shortened residence time, the likelihood of deposits forming on the interior walls of the flue decreases in proportion to the straightness of the flue route.

Concerning the chimney, chimney brushes are available for purchase. These brushes have flexible handles, which enable the chimney to be brushed from a clean-out on the bottom. In this manner, you are able to accomplish a job that is at least passable, but it is in no way comparable to the annual complete cleaning and inspection that should be performed.

In the event that these maintenance measures are not followed, there is a significant risk of a large chimney fire occurring. This is a prospect that is quite unsettling. Those who have witnessed one of these one-of-a-kind blazes attest that it is accompanied by a deafening boom as well as sparks and flames that fly out of the chimney. The most effective method for combating them is to totally seal off any and all airflow into the range. Maintaining your door gaskets, dampers, and other components is necessary for this to perform properly. After you have completed those steps, you should immediately dial 911 and then leave the house.

Creosote has a significant relationship to the type of wood that is burned. There is always going to be some amount of water in firewood. It is essential to know how much space it occupies. Wood that has been dried in the open air and piled in an area where the wind can pass through it will arrive in my region with a moisture content of between 12 and 20 percent. According to the majority of experts, the moisture level of firewood that is intended to be burnt in a wood stove should fall anywhere between 15 and 25%.

When wood is burned, all of the water that is contained inside it is converted into steam that is fully saturated. At a temperature of around 212 degrees Fahrenheit, it makes its way into the stack in the form of steam and water droplets. This is a significant reduction in temperature in comparison to the condensation point of creosote vapors, which is 250 degrees. Because of this, the chimney is cooled down by the presence of the steam, the gases condense, and creosote is produced.

This is true regardless of whether the wood being burned was hard or soft. The only thing that really counts is the amount of wetness. Even while you can’t get rid of it entirely, burning seasoned wood will reduce its impact significantly.
In support of knowing these essential information, it is for the best that you also have a company you can count on to help you with Chimney Cleaning Avery and repairing like Local Chimney Sweep Cleaning.

Many Chimney Leaks are from Cracks in the Chimney Crown Avery

Scroll to Top

Enquire Now