Upside Down Fire Techniques Compared
If you own a home and a fireplace, there’s a good possibility that you’ve stacked wood in a fireplace using your own tried-and-true techniques throughout the course of your many years of experience. The Upside-Down Fire is, in our opinion, the method of constructing a fire that is the most effective.
Building fires is no exception; we all have our preferred strategies for performing things like this. Here are 3 different techniques to build a wonderful fire in your fireplace. This article discusses several different approaches, and it is up to you to choose which one is most effective.
What exactly is meant by a “Upside Down Fire”?
An “Upside Down Fire” is a straightforward method that involves burning material from the highest point to the lowest, and it allows for a longer burn period while consuming less wood. The planks of wood are organized by stacking them in a manner that alternates between forward and backward. Add tinder and kindling on top and fire to enable the flame to capture the lower part. When it comes to starting a great flame and keeping the fire going for a longer period of time, our experience has shown that the ideal strategy is to construct the fire in an inverted position.
What is meant by the term “Top-Down Burn”?
The process of starting a fire in such a way that it burns from the top down is referred to as a “Top Down Burn.” The pieces of wood are grouped by size. Starting with the largest logs, which go right on the bottom of your fireplace, work your way up to the ones that are the tiniest and set those on top of the stack.
Methods Utilized Historically for Kindling a Fire
A sliver of heat may be created to warm the flue if one makes use of a firelighter and a condensed quantity of kindling in conjunction with one another. The pace at which firelighters burn is consistent, making them a simpler way to use than newspaper, whose burning rate might vary depending on the state it is in when it is burned.
If you choose paper that is too flimsy, it will burn too quickly and may fail to ignite the kindling, which will need you to begin the procedure of lighting the fire all over again. If the paper is too dense, it will not burn completely and will instead smolder, which may result in an excessive amount of smoke. If the flue is not at the right temperature, this smoke may come out of the appliance’s vents.
The Typical Procedures for Lighting
Place two pieces of newspaper the size of a tabloid that have been crumpled into a loose ball and roughly the size of a cricket ball in the combustion chamber. Alternatively, you can use firelighters.
Kindling should be arranged on top of the newspaper in the form of a triangle, with spaces between the pieces to allow for ventilation. When using bigger appliances, arrange two logs of a similar size on either side of the kindling. This will make it possible to place larger logs on top of the kindling once it has been lit.
To make lighting as simple and uncomplicated as it may possibly be, check that the air controls are adjusted according to the instructions provided by the manufacturer.
Better to be safe than sorry. Let the experts handle your chimney troubles like Chimney Cleaning Rail Road Flat and repairing. Call Local Chimney Sweep Cleaning today.