Logs With Low Moisture Content

Stacking and storing your wood in the correct manner is the most effective method for reducing the amount of moisture that is contained in your wood. In the same way that one would start a fire, the wood ought to be arranged in such a way that it allows air to circulate freely all around it. It is important to cover the wood while it is stacked outside so that it is protected from the pounding rain. This will make it possible for air to pass through the wood, which will hasten the drying process. It is not a good idea to cover the wood with a tarp in such a way that it is compressed. Even though it is not raining directly on the wood in this case, the tarp is still preventing moisture from escaping from the pile. As a result, condensation is forming, and it will take significantly longer for the wood to dry out.

When it comes to burning wood in a fireplace or a wood stove, the finest types of wood to use are hardwoods like oak, maple, and ash. Depending on the size of the split logs, it will take around one to two years for hardwoods to dry out adequately if they are stored. The most accurate method for determining the amount of moisture that is present in the wood is to invest in a moisture meter.

It is important to prepare the chimney before lighting a fire and to raise the height of the grate or basket.

There are a number of different approaches to preheating the chimney. To preheat the flue, you can make use of everyday items found around the house, such as a hair dryer, a large candle with three wicks, a heat gun, or a handheld propane torch. If you move the heating element up the flue and hold it there for a minute or two, you should generate sufficient heat to start a draft. In addition, there is a device available that is known as the Draw Collar. This item is a heating element that is integrated into a stove pipe portion. This will cause the temperature within the stove pipe to rise to as high as 400 degrees and will force the smoke up the chimney. If you want to avoid having a smokey wood stove when you try to light it from a cold start, the Draw Collar is the product that will do the best job of preventing that from happening.

Offer Sufficient Air to Compensate for the Air That Will Be Lost
Oxygen and fresh air are essential ingredients in the process of burning wood. The presence of additional oxygen in the room will cause the fire to burn at a higher temperature. Since the fire is still going strong, it is sucking all of the oxygen-rich air out of the house as it burns. There is a possibility that the fire will consume all of the oxygen in the room at some point, at which point it will begin to smoke and eventually go out.

Turn on the Fan or Open a Window in the Room That the Chimney Is in.
It is possible for a woodstove or fireplace in a more modern home that was built to be energy efficient and very airtight to draw the fresh air out of the room at a faster rate, which reduces the effectiveness of the draft. In the event that this occurs, you can provide the stove or fireplace with fresh air by slightly cracking a window or opening a door for a few minutes. You can also attach a fresh air intake directly to a wood stove to provide a steady flow of air to the stove provided the stove is equipped with the potential to do so. This option is only available if the stove was manufactured with this capability. A fresh air intake hood can be mounted on the exterior wall of your house, and a pipe can be routed within the wall to reach the rear of your range. Installing a fresh air inlet in a home that was built relatively recently and is designed to be very airtight can be considered to be of the utmost importance.

If you have any concern or inquiries but is not sure you can call Local chimney Sweep Cleaning to help you. We also offer professional Chimney Cleaning Antiochand repairing.

Increase Draft in Your Chimney Antioch
Prevent Drafts from a Fireplace Antioch