When the Gas Fireplace Would not Stay Lit
On a chilly evening at home, there is nothing more soothing than spending time with someone you care about while sitting in front of your fireplace and chatting about anything and everything. Whether it is built into the wall or in a mantle, there is nothing more calming. When the parts of your gas fireplace begin to wear out or when you fail to properly maintain it, it may be quite frustrating when the fire in your fireplace does not remain lighted.
In the event that this occurs, there is no need to freak out because the likely source of the problem may be something that can be quickly rectified and does not require the assistance of a professional. If you have a fireplace in your house that just won’t stay lit, you may try the following do-it-yourself remedy.
Check to see if the fireplace’s pilot light is lit before you start working there.
When you are dealing with fireplaces that won’t remain lit, the first thing you should do is check to see whether or not the pilot light is lighted. You might be surprised to learn that lighting your pilot is the simplest solution to this problem, but it really is the case. Inside fireplaces, the pilot light is normally situated on one of the sides, quite near to the adjacent wall. It is recommended that, if you have gas logs, you place them in the same location as the logs.
Color of the Pilot Light
Aside from the fact that your pilot should be lighted, the flame should remain a consistent blue color. The color blue should make up roughly 90 percent of your pilot, with very little yellow. In addition to this, it should be in contact with the sensors that are all around it, such as the thermocouple and the thermopile. If the color of the flame changes to yellow or red, this is an indication that there is pollution from gas.
The Solution to a Pilot Light That Won’t Stay Lit in a Gas Fireplace
You have examined the pilot light in your stove and even reset it, but it still won’t remain lit. What gives? It’s possible that this is a sign that the thermocouple in your fireplace is broken or just worn out. If, on the other hand, your gas fireplace’s pilot light is lit but the gas itself isn’t, then there’s obviously something wrong with your thermopile.
Tools Needed
Digital multimeter
Fine-grit sandpaper
Stainless Steel Brush
What makes a thermocouple different from a thermopile?
The thermocouple operates in a manner similar to that of a sensor for the flow of gas and is responsible for supplying gas to the pilot light via the gas valve. When the fireplaces are activated, the thermopile, on the other hand, allows gas to flow freely by opening the valve. The thermocouple and the thermopile both convert heat into electrical current, however the thermopile creates a greater amount of electrical current than the thermocouple does. Both of these devices perform the same basic purpose.
If you have any concern or inquiries but is not sure you can call Local chimney Sweep Cleaning to help you. We also offer professional Chimney Cleaning Copperopolis and repairing.