How to Relight Your Standing Pilot Fireplace

When it comes to fireplaces, there are several alternatives. Fireplaces are an excellent way to add ambience while saving money on other utilities. Some folks have a wood-burning fireplace, while others have a gas-burning fireplace. Some gas fireplaces contain what is known as a pilot ignition. There are several types of pilot ignitions, ranging from intermittent to standing pilot lights. Those who have a fireplace with a standing pilot light may need to relight the pilot light on occasion. This is a rather simple procedure, however there are a few stages involved.

The Procedure for Relighting a Pilot Light
It is critical to follow these easy steps when relighting a standing pilot light furnace:

First, locate the required fireplace components. These are often found beneath the firebox itself. In certain circumstances, shifting the ornamental face of the fireplace may be required to disclose these vital components. Then ascertain that the fireplace has a working pilot light. If it does, it should include many components, including a knob (with an on/off switch) or a switch and an igniter. After that, carefully remove the glass from the front of the fireplace to reveal the chamber.

Check that the igniter is operating properly. Press it numerous times and look for a spark to do this. Dim the lighting if the sparks are difficult to see. The sparks should be noticeable but not excessively large. Then, locate the control knob. Insert the knob and begin to turn it. Turn the slider until the word “pilot” reaches the hash mark. While continuing to push the knob in, squeeze the igniter several times until it fires.

Continue to push the knob in for around 30 seconds after the igniter has ignited. Make certain that the fireplace remains lighted. Allow the fireplace to cool for five to ten minutes if it does not stay lit. Then try again. Return to the knob after the fireplace has been blazing for a few minutes. Shift it until it is in the “on” position. The standing pilot light has now turned on. Remember to return the glass and ornamental front to their proper places. The fireplace may now be quickly turned on.

When Lighting the Standing Pilot Light, Take Care
There are a few measures that everyone should take while dealing with the standing pilot light. These are some examples:

-Avoid getting too near to the sparks since they might burn if they come into touch with your flesh.

-Take cautious not to be cut by the glass.

-Make sure the glass is positioned safely to avoid people from treading on it.

-If the igniter does not light after a few seconds, wait a few seconds before pressing it again.

-Remember to return the knob to the “on” position, since keeping it in the “pilot” position for an extended length of time may harm the standing pilot light.

-When relighting a pilot for a gas fireplace, it is always crucial to prioritize safety.

Relight the Pilot Light on the Gas Fireplace
These are the actions that must be taken in order to relight the standing pilot light. Before attempting to relight the gas fireplace pilot, become acquainted with the locations of the components. When relighting a pilot, it is critical that everyone prioritizes safety. Or just call local Chimney Sweep Cleaning and we can also help you for your needed Chimney Cleaning Nelson and repairing.

Fix Your Fireplace Issues Nelson
Why Burning Wood Somewhat Green Nelson